Description

Experience the ultimate comfort and relaxation with Sensory Hugs, a double-layered reversible cotton/spandex soft sensory swing in pink and grey.

  • Double Layer Design: The double-layered construction of the swing provides extra durability and a cozy feel, ensuring hours of fun playtime. My son loves to spin in his!!
  • Reversible Feature: Easily switch between pink and light blue colors for a versatile look that complements any space.
  • Hiding Place Fun:
  • The soft sensory swing not only offers a relaxing experience but also serves as a playful hiding spot for added excitement during playtime.
  • Age Suitability:
  • This product is not suitable for children under 36 months, making it ideal for older kids and adults seeking stress relief through gentle swinging motions.
  • Great for learning body awareness, balance, motor planning and spatial skills. A fun, private space to bounce, swing, spin or just lie motionless while enjoying the movement. A must swing for your clinic, home or school.

Comes with all the hardware for attaching to beam on ceiling. Please get a professional person to fit!

Legal Disclaimer

Disclaimer: Adult Super Vision Required. There is a chance the rope may fray over time especially if it receives a lot of friction depending on how it is hung. Watch for signs of wear on the rope and replace the rope if you notice any fraying. Please Check and make sure knot is secure before using.

 95% COTTON 5% SPANDEX- Quality Fabric.

 80KG weight limit

Active eyes on supervision at all times

Fall and strangulation hazards if product is not used correctly

Designed for indoor use, can go outside but must be brought back inside after use

Routinely check all aspects of product for wear and damage, discontinue use if damage found.

Move fabric around periodically to prevent wear in one spot

Ages 4 and up.

INSTALLATION (by professional).

 Step 1 Locate a beam minimum 4cm wide, and a site with 1 metre radius from any objects.

 Step2 Use base plate to mark holes in beam. Use 12mm bit to drill to 5cm depth into beam.

 Step 3 Insert 4 bolts into holes, so metal sleeve is flush with beam. If beam can’t accommodate 4 bolts, 2 are sufficient.

 Step 4 Install base plate onto bolts, and tighten to secure bolt, sleeve, and plate into beam.

Step 5 Connect carabiner to plate, thread rope through swing and carabiner, and adjust length accordingly.

Tie knot securely and enjoy!